Local Network acccess NEON® ONE

Overview

You can access the NEON® ONE directly within your local network using any device with a web browser. This allows monitoring and configuration without requiring internet access or Cloud Connect®.

---

Requirements

• NEON® ONE connected to your local network via Ethernet
• Computer, tablet, or smartphone on the same network
• Web browser (Chrome, Firefox, Edge, Safari, etc.)

Note: No internet connection required – only local network connectivity.

---

How to Connect

Step 1: Find the IP Address

1. On the NEON® ONE, go to Main Menu → Remote Access
2. Note the displayed IP address (e.g., 192.168.1.100)

Step 2: Open Web Browser

1. On your computer or mobile device, open a web browser
2. Enter the IP address in the address bar (e.g., http://192.168.1.100)
3. Press Enter

Step 3: Access the Web Interface

The NEON® ONE web interface opens, allowing you to:

• View live measurement values
• Monitor sensor status
• Access system information
• Configure settings (depending on user role)

---

When to Use Local Network Access

Use Case	Local Network Access
Monitor from office computer on same network	Ideal
Multiple users need simultaneous access	Ideal
No internet available but LAN exists	Ideal
Access from outside the building	Use Cloud Connect® instead
No network infrastructure at all	Use Wi-Fi Access Point (App Connect) instead

---

Troubleshooting

Problem	Solution
Cannot reach the IP address	Ensure your device is on the same network as the NEON® ONE
No IP address displayed	Check Ethernet cable connection; verify network has DHCP enabled
Page loads slowly	Check network congestion; try a different browser
IP address changed	Check Remote Access menu for current IP; consider setting a static IP in your router