Tubing and Connectors – Argon StabiFlow®

Learn about connecting tubing to the StabiFlow® to enable water flow.

To get water flowing to the Argon StabiFlow®, you will need to connect the valves to your desired tubing material. Below are two examples of connecting the valves to your sample line.

The Argon Stabiflow® and acrylic flow cells have a female G1/4″ (BSP) thread connector.

Example 1:

Value type: Water Inflow or Outflow Valve

Tubing type: 8/6 tubing (approximately 1/4″ tubing)

 >  > 

Example 2:

Value type: Sample Valve

Tubing type: Various

 >